Monocrystalline photovoltaic module Q300/ Q300HP

Invent photovoltaic modules Q300 – Q300 HP  vare all made in Italy according to certified quality systems and with a high-output automated production line. 

All Invent modules are equipped with Invent’s patented InvisibleCell® technology, which makes the module’s electrical connections invisible, making the panels aesthetically pleasing with an elegant and modern design.

At the end of their lifespan, these modules will not give you any problems because Invent is a member of PV Cycle.

Features Q300

Features Q300 HP

EN 61215 (2005) - 10.17

Hail test

25 mm ice ball at 23.0 m/s-1 on 11 impact locations. Additional simulation of an impact whose energy is equal to an ice ball measuring 30 mm in diameter.

EN 61215 (2005) - 10.16

Mechanical load test

The module is subjected to 5400 Pa. We also carry out an additional test during which the module is subjected to 7500 Pa to ensure perfect resistance.

EN 61730-2 (2007) - MST 21

Temperature test

5-hour exposure to 1,000 Wm>

EN 61215 (2005) - 10.11

Thermal cycling test (50 and 200 cycles)

50 and 200 cycles from -40 °C to +85 °C with STC peak power current during the 200 cycles

EN 61215 (2005) - 10.16

Mechanical load test

The module was operated at a temperature of 85 °C with a relative humidity of 85%

EN 61215 (2005) - 10.12

Humidity-freeze test

The module was operated at a temperature of -45 °C with a relative humidity of 85%

IEC 61215/61646, EN 61730-1, EN 61730-2, IEC 61701

Ammonia corrosion test

EN 61701 (2000)

Salt fog corrosion test

5-hour exposure to 1,000 Wm

Module Data

Module’s Name

Q300 / Q300HP

Power class

Wp

300

Yearly module production*

kWh

360

Efficiency

%

18,09

TECHNICAL DATA

Nominal tension

Vmp

32,2

Nominal power

A

9,31

No load voltage

Voc

39,6

Short-circuit current

A(Isc)

9,46

Full load voltage

V

1.000

Short-circuit current’s

temperature coefficient

Pm

4,60 mA/°C

No load voltage’s temperature

coefficient

Vo

-0,132 V/°C

Power’s temperature

coefficient

Voc

-1,021 W/°C

Power tolerance

Q300

0/+3%

Q300HP

0/+6%

NOCT

41,73°C

Values obtained under standard conditions: 1.000 W/m2 - 25°C - AM 1,5

* Calculated based on the production of the photovoltaic modules in the North of Italy with optimal orientation/inclination estimating a value equal to 1.200 kWh/kWp

Download the technical data sheet Q300

Download the technical data sheet Q300 HP